• PLS’ UDE 4.8.3 makes troubleshooting of NXP’s new S32K1 automotive microcontrollers easier

    Intuitive debugging and testing for NXP’s new S32K1 automotive microcontrollers

    read more
  • PLS’ UDE 4.8 simplifies trace analysis and the evaluation of runtime behavior of embedded systems

    PLS is presenting version 4.8 of its Universal Debug Engine (UDE) for the first time at embedded world 2017...

    read more
  • PLS' new all-in-one access device UAD2next makes fast troubleshooting and fault analysis at system level easier

    PLS introduces its new Universal Access Device 2next (UAD2next) at the embedded world 2017...

    read more
  • Optimized Debug, Test, and System Analysis Tool for Infineon’s New AURIX™ TC3xx Multi-Core MCU Family

    UDE 4.7 from PLS enables comprehensive control of up to six TriCore cores from a single user interface

    read more
  • PLS' UDE 4.6 Supports the STMicroelectronics 32-Bit Power Architecture® SPC570S Family Automotive MCUs

    Comprehensive testing and debugging environment for safety-critical automotive applications ...

    read more
  • PLS’ UDE 4.6.2 with unique search function supports the rapid analysis of very large amounts of trace data

    Simplifying troubleshooting when using highly complex SoCs ...

    read more
  • PLS’ UDE 4.6.1 Now Supports NXP’s Latest MPC5746R Power Architecture® Microcontroller

    Optimized Environment for Debugging and Test ...

    read more
  • UDE 4.6 once again sets new standards in the areas of trace functions, multicore debugging and test automation

    Simplifies development with complex heterogeneous high-end SoCs ...

    read more
  • UDE is also now available for STMicroelectronics Cortex-M7 core-based STM32F7 series MCU

    Full support of all on-chip peripheral units and internal debug functions ...

    read more
  • UDE 4.4.6 supports all functions of STMicroelectronics new SPC58 E-line multi-core automotive MCUs

    UDE available at the same time as the first MCU samples ...

    read more
  • PLS’ UDE 4.4.5 provides optimized testing and debugging environment for Infineon’s XMC4700/XMC4800 SoCs

    Available now: UDE 4.4.5 for XMC4700/XMC4800 ...

    read more
  • PLS’ Universal Debug Engine 4.4.3 simplifies testing and debugging highly complex Xilinx Zynq-7000 SoC devices

    Offers developers the ability to make full use of device-specific test and debug functions ...

    read more
  • UDE 4.4 simplifies testing and debugging highly complex heterogeneous multicore SoCs

    Significantly enhanced range of functions and optimized data visualization ...

    read more
  • Universal Debug Engine (UDE) now also supports the Infineon TLE986x and TLE987x Embedded Power ICs

    Optimum support guaranteed for device-specific test and debug functions ...

    read more
  • PLS and LieberLieber Software cooperate on UML test and target accesses

    Complete solution for testing and debugging embedded software on the model level ...

    read more
  • PLS' Universal Debug Engine supports all functions of Freescale's latest Qorivva automotive SoCs

    In parallel to Freescale's presentation of its latest Qorivva derivates, PLS Programmierbare Logik & Systeme provides system developers with its Universal Debug Engine (UDE) for the multi-core System-on-Chips (SoCs) MPC5746M, MPC5777M, MPC5748G, MPC5746C, MPC574xP ...

    read more
  • Tool Qualification Packages (TQPs) available for various architectures and cross compilers

    PLS Programmierbare Logik & Systeme and Razorcat now present a whole range of optimized, so-called Tool Qualification Packages (TQPs) for the TESSY test platform for various architectures and cross compilers ...

    read more
  • PikeTecs TPT test software and PLS' UDE now permit model-based tests directly on the target platform

    Tests directly on the target hardware with PikeTec's TPT model-based software tool are now possible as a result of coupling with the PLS (Programmierbare Logik & Systeme) Universal Debug Engine (UDE) ...

    read more
  • PLS' Universal Debug Engine 4.2 enables real multicore debugging even with deeply embedded systems

    PLS Programmierbare Logik & Systeme is exhibiting the Universal Debug Engine (UDE) 4.2 at its Booth 4 310 in Hall 4 at embedded world 2014, February 25 27, 2014 ...

    read more
  • Optimal development, test and debug environment for MPC57xx and SPC57x microcontrollers

    The Universal Emulation Configurator (UEC) from PLS Programmierbare Logik & Systeme is now also available for the emulation devices MPC57xx from Freescale and SPC57x ...

    read more
  • PLS' Universal Debug Engine now also available with its own debug perspective for the new Eclipse 4.x platforms

    PLS Programmierbare Logik & Systeme provides developers with the Universal Debug Engine (UDE) version 4.0.8 an own debug perspective for the current Eclipse 4.x platforms (4.2 Juno, 4.3 Kepler) at no extra cost ...

    read more
  • UDE 4.0.4: PLS' Universal Debug Engine now also available for Texas Instruments' Hercules™ safety MCU platform

    With their Universal Debug Engine (UDE) 4.0.4, PLS Programmierbare Logik & Systeme have introduced an optimized test and debug solution for Texas Instruments' Hercules™ microcontroller platform which has been developed especially for safety-critical applications in compliance with IEC 61508 SIL-3 or ISO 26262 ASIL D ...

    read more
  • Optimized debugging solution for the new ARM® Cortex(TM) -M0 core-based XMC1000 microcontroller family of Infineon

    PLS Programmierbare Logik & Systeme presents an optimized test and debugging solution, the Universal Debug Engine (UDE) version 4.0.2, for the new ARM® Cortex™-M0 core-based 32-bit microcontroller family XMC1000 of Infineon Technologies that delivers 32-bit performance at 8-bit prices ...

    read more
  • Dedicated support for a wide range of the latest 32-bit multicore SOCs

    PLS Programmierbare Logik & Systeme presents its new Universal Debug Engine (UDE) 4.0 at its Booth 4-310 in Hall 4 at embedded world 2013, February 26‑28, 2013 in Nuremberg, Germany. The new UDE 4.0 features greatly enhanced debug capabilities for multicore targets, optimized visualization options during system test and dedicated support for a wide range of the latest 32-bit multicore System-On-Chips (SOCs) from various manufacturers ...

    read more
  • PLS' Universal Access Device 2pro now also enables strong electrically isolated connections to the target

    PLS Programmierbare Logik & Systeme presents its Universal Access Device 2pro (UAD2pro) at electronica 2012 in Hall A6, Booth A12. The UAD2pro is an especially high-performance, versatile target access device for on-chip debugging of a wide range of 16‑bit and 32‑bit microcontrollers ...

    read more
  • With the UDE 3.3, PLS presents the first optimized test and debug solution for the new AURIX(TM) 32-bit multi-core MCUs

    As a result of the very early and close cooperation with Infineon Technologies and several key customers, PLS now presents the first optimized test and debug solution, the Universal Debug Engine (UDE) 3.3, for the new multi-core architecture of the 32-bit microcontroller family AURIX ...

    read more
  • UDE 3.3 now also available for Freescale MPC57xx and STMicroelectronics SPC57x families of MCUs

    As a result of the early and close cooperation with Freescale and STMicroelectronics, PLS Programmierbare Logik & Systeme, as authorized tool partner, now offers Version 3.3 of its Universal Debug Engine (UDE). The UDE 3.3 is a sophisticated and proven test and debug solution for the new Freescale MPC57xx family of Qorivva automotive multicore microcontrollers (MCUs) and the STMicroelectronics SPC57x family MCUs ...

    read more
  • UDE 3.2.1 makes introduction into the world of XMC4000 easier for developers

    Synchronized with the market launch of the new XMC4000 microcontroller (MCU) family of Infineon Technologies which is based on ARM® Cortex(TM) -M4 processor, PLS Programmierbare Logik & Systeme presents its Universal Debug Engine (UDE) 3.2.1, optimized test and debug tools for the high performance and also energy efficient SoC devices ...

    read more
  • PLS' new universal multicore workbench simplifies multicore control and debugging at system level

    PLS Programmierbare Logik & Systeme presents its Universal Debug Engine (UDE) 3.2 for the first time at embedded world 2012, Nuremberg in Hall 4, Booth 4-310 from February 28 to March 1, 2012. The UDE 3.2 features new functions for a particularly efficient multicore control, unique visualization capabilities at system level and the dedicated support for a wide range of the latest 32-bit SoCs from different manufacturers ...

    read more
  • Complete debug and test solution for users of the Development Device

    PLS Programmierbare Logik & Systeme now introduces its Universal Debug Engine (UDE) 3.1.7., the first debugger solution for the new 32-bit multicore architecture, which Infineon Technologies AG introduced in October of this year. This solution is the result of a very early and close cooperation of Infineon with PLS as tool partner ...

    read more
  • Optimized development tools for Infineon's new TC1791, TC1793 and TC1798 AUDO MAX 32-bit microcontrollers

    PLS Programmierbare Logik & Systeme now also supports the latest TC1791, TC1793 and TC1798 32-bit automotive microcontrollers (MCUs), which operate with clock frequencies of up to 300 MHz, of Infineon's AUDO (AUtomotive unifieD processOr) MAX family with its modular component based Universal Debug Engine (UDE) 3.0.10, its Universal Access Device 2 family and its Universal Emulation Configurator (UEC) ...

    read more
  • PLS' Universal Debug Engine (UDE) now also supports netX controllers and rcX real-time operating system from Hilscher

    PLS Programmierbare Logik & Systeme introduces the latest Version 3.0.8 of its Universal Debug Engine (UDE). The UDE 3.0.8 is an optimized test and debug tool for the family of netX network controllers and rcX real-time operating system from Hilscher ...

    read more
  • UDE 3.0.7 enables efficient testing and debugging of LPC4300 dual-core SoCs under a single user interface

    The latest Version 3.0.7 of the Universal Debug Engine (UDE) from PLS is equipped with optimized test and debug functions for NXP's LPC4300 highly integrated dual-core system-on-chip (SoC) family and offers unlimited dual-core debugging under a single user interface ...

    read more
  • UDE 3.0 optimizes the extended test and debug capabilities of the Cortex-M4 core: Complete test and debug environment for Freescale's ARM® Cortex(TM) -M4 based Kinetis microcontroller family

    PLS Programmierbare Logik & Systeme presents an optimized test and debug tool specifically for Freescale's ARM® Cortex(TM) -M4 based 32-bit Kinetis microcontroller family in Hall 10, Booth 10.215 at embedded world 2011 ...

    read more
  • UDE 3.0 - PLS presents the latest version of its Universal Debug Engine

    PLS Programmierbare Logik & Systeme presents its Universal Debug Engine (UDE) 3.0 in Hall A10, Booth A10.215 at embedded world 2011 in Nuremberg from 1 to 3 March 2011. The UDE 3.0 features unique visualization capabilities, an enhanced Eclipse integration and extensive dedicated support for a wide range of popular high-end microcontroller architectures ...

    read more
  • PLS and HighTec present completely new toolchain for Power Architecture SoCs from STMicroelectronics and Freescale

    PLS Programmierbare Logik & Systeme and HighTec EDV-Systeme present a completely new common development environment for Power Architecture e200 core based SoCs from STMicroelectronics and Freescale at electronica 2010 in Hall A6, Booth A6.442 (PLS) and Booth A6.S04 (HighTec) ...

    read more