Embedded Development Tools and Debuggers for XC2000, TriCore, PowerPC, ARM, Cortex, SH-2A » Company » Tool Partners
| Print |

Microcontroller Tool Partners

Compiler for XC166, XC2000, TriCore, PowerPC, ARM, Cortex, XScale, SH-2A

HighTec EDV-Systeme GmbH Realtime Technology

The GNU C/C++ Compiler for the TriCore, PowerPC or ARM architecture is based on the GNU software. It was ported and modified by HighTec EDV-Systeme GmbH.

TASKING - Embedded software development tools

The Tasking compiler is designed for all derivatives of the C16x, ST10, XC16x, TriCore and ARM microcontroller families. All special features and peripherals of the controllers are accessible in C. ANSIC is supported completely. The generated program code shows compact size and excellent performance.
Keil Software

Keil Software

Keil™, an ARM® company, makes C compilers and evaluation boards for the ARM, Cortex-M3, XC166, ST10 and C166 microcontroller families. 

Wind River - Device Software Optimization

The Wind River Compiler combines industry leading optimization technology with the flexibility and control needed to fully exploit today's complex CPUs. The Wind River Compiler design is based on a modular architecture that results in proven reliability, flexibility for embedded applications, and interoperability with other development tools.

Byte Craft Limited

Manufacturer of the eTPU Compiler for Freescale PowerPC derivatives.

Renesas Technology

The RENESAS SH-2A C/C++ compiler has a powerful optimization function for exhibiting the microcomputer performance to its full capacity in order to create a compact code. Also, this compiler amply supports the expanded function for equipment embedding, thereby enabling meticulous micro computer control.

Real Time Operating Systems and Test Systems

Hilscher Gesellschaft für Systemautomation mbH

The rcX real-time operating system, which is specifically tailored to the architecture of the Hilscher's netX controllers, is a pre-emptive, multitasking operating system with a very low resources requirement.

HighTec EDV-Systeme GmbH Realtime Technology

PXROS is an operating system for hard realtime. It was developed by HighTec and has been in successful operation for more than 20 years in different fields ranging from communications technology to the industrial sector and to safety-critical applications (SIL-4). It is available for TriCore, PowerPC, ARM, C16x.
TCP/IP has become the most important protocol family for communication in a LAN or a WAN. PXtcp was developed especially for the purpose of integrating a PXROS application into a TCP/IP based network.

ENEA - Embedded for Leaders

The OSE Real-Time Operating System (RTOS) is a fully pre-emptive operating system for C16x, ST10, TriCore, ARM7, ARM9 microcontrollers. The kernel shows excellent performance due to its optimized handling of interrupts, dispatches and memory allocation.

BKR Software

With EasyCODE, developers can write C/C++ programs at the graphical level of Advanced Nassi Shneiderman Charts. EasyCODE generates C/C++ source code from structogram input. EasyCODE can read any C/C++ source file and display it at structogram level too.

RTI - The Real Time Middleware Company

StethoScope gives you a window into the very heart of your application, presenting a live analysis of your program while preserving real-time performance and is developed by Real-Time Innovations, Inc. (RTI). RTI is a leading developer of new tools for the growing real-time software market.

Razorcat

You can build your own application specific automated test system by using the COM interfaces of UDE. The test system Tessy from Razorcat offers automated module testing of C code directly on the target system using Universal Debug Engine (UDE) debugging technology from PLS. It supports the whole unit testing cycle and works transparently on all target platforms currently supported by UDE.
CMX-RTX Systems

CMX-RTX Systems

The CMX-RTX Real-Time Operating System (RTOS) is a fully preemptive operating system with a powerful set of system functions, very moderate memory requirements and fast system response time.
CMX-TCPIP is a portable high performance TCP/IP implementation for embedded systems. It uses the CMX-RTX RTOS signaling mechanisms to provide a true multitasking reentrant stack. CMX TCP/IP can also be run without an RTOS.

AbsInt Angewandte Informatik GmbH

AbsInt provides advanced development tools for embedded systems, and tools for validation, verification and certification of safety-critical software. AbsInt's tools are designed to enhance software, speed up time-to-market, lower testing and validation costs and to improve software efficiency.
aiT WCET Analyzer is a tool to verify the timing behavior of tasks in safety-critical embedded applications. aiT computes safe upper bounds on the Worst-Case Execution Time. It directly analyzes binary executables and takes the intrinsic cache and pipeline behavior into account. StackAnalyzer automatically computes the worst-case stack usage of the tasks in embedded applications.

Embedded Office

µC/OS-II is a portable, scalable, pre-emptive, real-time deterministic multitasking kernel. Offering unprecedented ease-of-use, µC/OS-II is delivered with complete 100% ANSI C source code and in-depth documentation. It is successfully implemented in some of the highest level safety-critical devices. µC/OS-II helps you saving development time and puts greater control of the software in your hands. Join the ranks of the thousands of engineers that consider Micrium's robust and reliable µC/OS-II and the brand new µC/OS-III their top choice for their embedded designs.

Simulators

Synopsys

Synopsys is a world leader in electronic design automation (EDA), supplying the global electronics market with the software, IP and services used in semiconductor design and manufacturing.

VaST Systems Technology

VaST Systems Technology Corporation solutions enable the creation of a virtual system prototype—a highly accurate software model of a system that operates at near real-time speeds under actual software loads. VaST’s solutions are OSCI SystemC-compliant and are used for architecture, hardware, and software design.

AXYS® Design Automation

AXYS® Design Automation, Inc., the technology leader in multi-core System on Chip (SoC) simulation, debugging and verification solutions, is the manufacturer of the Design MaxSim Developer Suitefor fast and accurate multi-core simulation and synchronous Systems-on-a-Chip (SoC) debugging.

Carbon Design Systems™

Carbon Design Systems™ is the leading supplier of system-level tools to automatically create, validate and deploy software models generated from Verilog and/or VHDL descriptions and is the owner of the SoC Designer tool.

Training & Consulting

Willert Software Tools

Our partner Willert Software Tools GmbH is holding tool selection seminars on a regular basis. During these seminars you will be given the chance to install the previously purchased development environment and to start working with it under assistance. Usually, with the knowledge gained from such class you may easily save a couple of days when launching your new project (depending on your previous knowledge on the subject).

MicroConsult

MicroConsult GmbH offers Training, Coaching and Engineering support for development teams all over the world. The Munich-based company provides know-how and experience across all levels of hardware and software development, from technologies, tools and methods through to comprehensive processes. Our success is based on expertise across all project phases - from specification to system test - and includes EDA, microcontrollers and microprocessors, bus systems, operating systems as well as all key topics of embedded software development. For more information, please visit our website by clicking our company logo.

Embedded Systems Academy


Embedded Systems Academy develops the CANopen Magic Pro DLL, a system allowing custom CANopen based PC applications to be quickly and easily developed without needing to know all the details of CANopen.


Semiconductors

Infineon Technologies

Infineon Technologies is the manufacturer of the C166, XC166, XC2000, XE166 and TriCore microcontroller families.
 

STMicroelectronics

STMicroelectronics is the manufacturer of the ST10F2xx, ARM7 STR7xx, ARM9 STR9xx, PowerPC SPC560, SPC563 and Cortex-M3 STM32F microcontrollers.

NXP / Philips

NXP is the manufacturer of the Cortex-M3 LPC1000, ARM7 LPC2000 and ARM9 LPC3000 microcontroller families.
??

Marvell

Marvell is the manufacturer of the XScale PXA255, PXA270 and IPX420, IPX450 microcontroller families.

Atmel

Atmel is the manufacturer of the ARM7/ARM9 AT91x microcontroller family.

Analog Devices

Analog Devices is the manufacturer of the ARM7 ADuC70x embedded controller.

NetSilicon / Digi

NetSilicon/Digi is the manufacturer of the ARM7 NET+20, NET+50, NS7520 and ARM9 NS9360, NS9370 derivatives.
??

Freescale / Motorola

Freescale is the manufacturer of the PowerPC MPC55xx, ARM9 i.MX27, i.MX31 and ARM7 MAC71xx microcontroller families.

TexasInstruments

Texas Instruments is the manufacturer of the ARM7/Cortex-M3 TMS470 and ARM9 OMAP5912 derivatives.
??

AMCC

AMCC is the manufacturer of the PowerPC PPC440 and PPC460 microcontroller families.

Renesas Technology

Renesas is the manufacturer of the SuperH SH-2A architecture.

Evaluation Boards

Phytec

PHYTEC embedded modules are based on ARM, XScale, PowerPC, C16x/XC16x/ST10 microcontrollers. The subassemblies support the embedded engineer in every stage of development.

TQ Components


TQ Components is a leading Bavarian technology service provider in the electronics sector. It is distinguished by a high degree of technological know-how in the development and production of state-of-the-art electronic modules and systems.

OIP Vendors and Consultants

ARM Connected

ARM is the world's leading semiconductor intellectual property (IP) supplier and provides developers with intellectual property solutions in the form of processors, physical IP, cache and SoC designs, application-specific standard products (ASSPs).

OCP-IP

OCP International Partnership (OCP-IP) is a non-profit semiconductor industry consortium formed to administer the support, promotion and enhancement of the Open Core Protocol (OCP) specification.
 

Events

4. Elektronik automotive congress
Development Platforms for ARM/Cortex, TriCore, PowerArchitecture

Read more ...

embedded world 2012
Eclipse based development platform for Qorivva microcontrollers, for Kinetis (Cortex-M4) applications

Read more ...

One-Day Crash Course
Multicore Debug Solution MCDS, TriCore Hardware und Treiber-Programming

Read more ...


News

Optimized debug
tools for the
new XMC4000
microcontroller
family
of Infineon
available now

Read more...
 

UDE 3.2:
Efficient multicore
control, unique
visualization
capabilities
and support for the
latest 32-bit SoCs
from different
manufacturers

Read more...
 

Complete debug
solution for the
Development
Device of the
new TriCore
Multicore
Architecture

Read more...
 
Optimized tools
for the new
TC1791, TC1793
and TC1798
AUDO MAX
microcontrollers
Read more...
 
netX controllers
and rcX RTOS
from Hilscher
now supported by UDE
Read more...
 
Dual-core debugging
of NXP's LPC4300
under the single user
interface of UDE
Read more...
 

Kinetis MCUs
from Freescale
based on Cortex-
M4 core supported
by UDE

Read more...
 

UDE version 3.0:
More visualization
capabilities, enhanced
Eclipse integration
and dedicated
support for a wide
range of MCUs

Read more...
 

Complete new
toolchain for
Power Architecture
SoCs
from
STMicroelectronics
and Freescale
based on Eclipse,
GNU and
Universal Debug Engine

Read more...
 
UAD3+ sets new standards in the field of high-end trace and multi-core / multi-target debugging
Read more...