Communication Hardware "Universal Access Device 2^pro" - UAD2^pro

The Universal Access Device 2^pro is the new smart member of the UDE target Access Device family. It replaces the approved UAD2 and offers new enhancements in the well-known form style. It establishes a bridge to the more powerful UAD3+ using the same target adapter solution.

UAD2^pro It offers fastest target access via JTAG, cJTAG, DAP, SPD (Single Pin DAP) via CAN, SWD, ASC and CAN with build-in ESD protection. Accessing your TriCore, PowerArchitecture, Cortex, C16x, ST10, XC2000, XE166, XMC4500, ARM7, ARM9, ARM11, SuperH SH-2A derivatives is now easier than ever. The unique combination of JTAG and CAN bus, measurements of a mere 13 x 8 x 3cm³, and a robust aluminum housing, predestine the UAD2pro for mobile use in the field.

Supported High-Speed Target Access

The Universal Access Device 2^pro is optimized for High-Speed Communication between the UDE on the Host PC and a target system. UAD2pro supports access features of UDE in an optimized manner.

• General target connector (1,65V - 5,5V I/O ring voltage) supports JTAG, cJTAG, DAP, SPD via CAN, SWD debug communication channel up to 50MHz shift clock - download rate up to 3.5MByte/s
• Special target adapter are available for all supported target and  interface definitions as TriCore, PowerArchitecture, Cortex, XC2000, XE166, XMC4500, ARM7, ARM9, ARM11, SuperH SH-2A with up to 50 MHz shift clock
• Isolated adapters (RF coupler technology with 1000 VRMS isolation) - supports full bandwidth 50MHz shift clock
• Lowest power consumption from target
• Flexible serial high-speed communication to a C16x, ST10, XC2000, XE166, TriCore, PowerArchitecture and ARM/Cortex based target system via a D-Sub connector. The following serial modes are available:
• Asynchronous serial RS232 interface
• CAN interface.
• 480 Mbps Communication Speed
• Supported OS (32 and 64 bit): Windows® XP, Windows® Vista, Windows® 7, Windows® 8.

Controller Peripheral	Interface	Transfer rate	UDE Support
ASC asynchronous	RS232	up to 1 Mbps
CAN (On-Chip CAN)	CAN	up to 1 Mbps
JTAG	TTL/LVTTL	up to 50 MHz
DAP	TTL/LVTTL	up to 50 MHz
SWD	TTL/LVTTL	up to 50 MHz
cJTAG	TTL/LVTTL	up to 50 MHz

CAN Bus Analyzer

CAN bus D-Sub male connector (CiA pin assignment) as debugging communication channel to C166, ST10, XC2000, XE166, TriCore, PowerArchitecture and ARM/Cortex based CAN target systems

• Independent intelligent subsystem enables continuous trace of CAN bus messages
• CAN bus analyzing may run as background task of debug communication.

Trademarks: TriCore is a trademark of Infineon Technologies. ARM, EmbeddedICE, Thumb are registered trademarks of ARM Limited. ARM7, ARM9, Embedded Trace Macrocell and Embedded Trace Buffer are trademarks of ARM Limited. Firewire is a trademark of Apple Computer, Inc. i.Link is a trademark of Sony Corporation. ST is a registered trademark of companies belonging to the STMicroelectronics Group. XScale is a registered trademark of companies belonging to the STMicroelectronics Group. All other brands or product names are the property of their respective holders.