Home » Products » Eval Boards » XC166, XC2000
| Print |

Supported Modules and Evaluation Boards for the XC166, XC2000, XE166 Families

Modules and Evaluation Boards

 

Starterkit SK-EB XC2365

  • Starterkit SK-EB XC2365
  • USB-wiggler-box
  • CD with documentation:Getting Started, first 3 Steps to setup you Hardware, install the Tools and Debug the first Program, Technical Documentation: e.g. User manual, Application notes, Data Sheet, Board, Documentation
  • Evaluation Versions of Development Tools: e.g. Compiler, Debugger, Memtool (Flash Programming Tool)
  • Training Documentation, Demo Programs, technical Foilset

Technical details

  • XC2365-72F66L 80 MHz
  • USB connector for ASC Interface
  • 4 pin header for LIN Transceiver (ASC1)
  • 16-pin header for JTAG interface (OCDS)
  • SUB-D9 connector for CAN High Speed Transceiver (CAN0)
  • 10pin (2x5) Header for CAN High Speed Transceiver (CAN1) 
  • 2 x CAN-Transceiver TLE 6251
  • LIN Transceiver TLE 7259
  • USB to UART bridge CP2102 - SPI EEPROM 128 Kbit AT25128N - 8 general purpose LEDs
  • Reset switch

Starterkit SK-EB XC2287

  • Starterkit SK-EB XC2287
  • USB-wiggler-box
  • CD with documentation:Getting Started, first 3 Steps to setup you Hardware, install the Tools and Debug the first Program, Technical Documentation: e.g. User manual, Application notes, Data Sheet, Board, Documentation
  • Evaluation Versions of Development Tools: e.g. Compiler, Debugger, Memtool (Flash Programming Tool)
  • Training Documentation, Demo Programs, technical Foilset

Technical details

  • SAK-XC2287-96F66L 80 MHz
  • USB connector for ASC Interface
  • 4 pin header for LIN Transceiver (ASC1)
  • 16-pin header for JTAG interface (OCDS)
  • SUB-D9 connector for CAN High Speed Transceiver (CAN0)
  • 10pin (2x5) Header for CAN High Speed Transceiver (CAN1) 
  • 2 x CAN-Transceiver TLE 6251
  • LIN Transceiver TLE 7259
  • USB to UART bridge CP2102 - SPI EEPROM 128 Kbit AT25128N - 8 general purpose LEDs
  • Reset switch

Starterkit SK-EB XC2267

  • Starterkit SK-EB XC2267
  • USB-wiggler-box
  • CD with documentation:Getting Started, first 3 Steps to setup you Hardware, install the Tools and Debug the first  Program, Technical Documentation: e.g. User manual, Application notes, Data Sheet, Board, Documentation
  • Evaluation Versions of Development Tools: e.g. Compiler, Debugger, Memtool (Flash Programming Tool)
  • Training Documentation, Demo Programs, technical Foilset

Technical details

  • SAK-XC2267-96F66L 80 MHz
  • USB connector for ASC Interface
  • 4 pin header for LIN Transceiver (ASC1)
  • 16-pin header for JTAG interface (OCDS)
  • SUB-D9 connector for CAN High Speed Transceiver (CAN0)
  • 10pin (2x5) Header for CAN High Speed Transceiver (CAN1) 
  • 2x CAN-Transceiver TLE 6251
  • LIN Transceiver TLE 7259
  • USB to UART bridge CP2102 - SPI EEPROM 128 Kbit AT25128N - 8 general purpose LEDs
  • Reset switch

Easy Kit XE164F

  • Easy Kit XE164
  • One USB Cable for Power supply, Virtual COM Port, Download & Debug Interface
  • Getting Started, first 3 Steps to set up your Hardware, install the Tools and Debug the first Program, Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual,  Application notes, Errata sheets, Data Sheets, Board Documentation
  • Evaluation Versions of Development Tools: e.g. Compiler, Debugger, DAvE Mother System v2.1 and Derivative Implementation Files (DIP), Memtool (Flash Programming Tool)
  • Training Documentation, Demo Programs, Hands On Training (HOT).

Technical details

  • XE164F-96F66F 66 MHz
  • One USB connector for ASC0 Interface via virtual COM port, JTAG (OCDS Level 1) and Power Supply
  • 4 pin header for LIN Transceiver (ASC1)
  • 16-pin header for JTAG interface (OCDS)
  • 2x10pin Header for CAN High Speed Transceiver (CAN1/CAN2)
  • 2 x CAN-Transceiver TLE 6250G
  • AT25128N SPI EEPROM
  • LIN Transceiver TLE 7259G
  • 8 general purpose LEDs 
  • Reset switch

Easy Kit XE167F

  • Easy Kit XE167
  • One USB Cable for Power supply, Virtual COM Port, Download & Debug Interface
  • Getting Started, first 3 Steps to set up your Hardware, install the Tools and Debug the first Program, Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual,  Application notes, Errata sheets, Data Sheets, Board Documentation
  • Evaluation Versions of Development Tools: e.g. Compiler, Debugger, DAvE Mother System v2.1 and Derivative Implementation Files (DIP), Memtool (Flash Programming Tool)
  • Training Documentation, Demo Programs, Hands On Training (HOT).

Technical details

  • XE167F-96F66F 66 MHz
  • One USB connector for ASC0 Interface via virtual COM port, JTAG (OCDS Level 1) and Power Supply
  • 4 pin header for LIN Transceiver (ASC1)
  • 16-pin header for JTAG interface (OCDS)
  • 2x10pin Header for CAN High Speed Transceiver (CAN1/CAN2)
  • 2 x CAN-Transceiver TLE 6250G
  • AT25128N SPI EEPROM
  • LIN Transceiver TLE 7259G
  • 8 general purpose LEDs 
  • Reset switch
 

News

Freescale’s Power
Architecture™
MPC5510 now
supported by UDE
UDE supports
Power Architecture™
MPC5510 from
Freescale with
unlimited multicore
debugging
Read more...
 
UDE supports new AUDO FUTURE family from Infineon
UDE supports new 32 bit microcontroller family AUDO FUTURE from Infineon:
TC1736, TC1767, TC1797 and emulation devices TC1767ED, TC1797ED
Read more...
 
UDE supports additional PowerPC family
pls have present at embedded world 2008 a new version of its Universal Debug Engine (UDE), tailored to the special features of AMCCs high-end PowerPC family 440.
Read more...
 
Infineon's new XE166 realtime signal controllers supported
At the same time as the market introduction of the XE166 real time signal controllers. pls introduces the Universal Debug Engine 2.2
Read more...
 
New major version of UDE 2.2
Highlights: ++ Full compatibility for Windows Vista ++ New additional front end with look and feel of Microsoft Visual Studio 2005 ++ ...
Read more...
 

Events

Visit us at the Embedded Systems Conference 2008
San Jose, CA, Booth #3020
Read more ...