Supported Modules and Evaluation Boards for the TriCore Family

Modules and Evaluation Boards

TriBoard TC1796
USB Cable
Extension Board
Technical documentation, User manuals (System Unit and Peripheral unit), Architecture manual
Evaluation Versions of Development Tools: e.g. Compiler, Debugger, Operating System from Tool Partners
Starter Kit Manual

SAK-TC1796-256F150E 150 MHz
1 x USB connector for ASC0 Interface via virtual COM port, JTAG (OCDS Level 1)
2 MByte embedded program flash with ECC
128 kByte data flash for scalable 16 kByte EEPROM emulation
192 kByte on-chip SRAM
16 kByte instruction cache.
Burst FLASH up to 16 MBytes (default: 4 MBytes)
asynchronous SRAM up to 1MBytes (default)
optional synchronous SRAM up to 8 MBytes
16-pin header for JTAG interface (OCDS Level 1)
2 x 10pin (2x5) header for CAN High Speed Transceiver (CAN0 and CAN1)
4 x 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals
2 x SUB-D9 Plug connector for FlexRay (optional)
ETK connector (optional)
Infineon’s Next generation micro controller supply TLE 7368 G
2 x Infineon’s High Speed CAN-Transceiver TLE 6250 GV33
USB to UART bridge FT2232D (FTDI)
SPI EEPROM (Atmel)
8 general purpose LEDs
Reset switch
Infineon’s FlexRay Communication Controller SAK-CIC310 (optional)
2 x FlexRay Transceiver AS8221(AMS) or TJA1080 (NXP) (optional)

TriBoard TC1766, TC1762
USB Cable
Extension Board
Technical documentation, User manuals (System Unit and Peripheral unit), Architecture manual
Evaluation Versions of Development Tools: e.g. Compiler, Debugger, Operating System from Tool Partners
Starter Kit Manual

SAK-TC1766-192F80HL or SAK-TC1762-128F80HL or SAK-TC1762-128F66HL 80 MHz
1 x USB connector for ASC0 Interface via virtual COM port, JTAG (OCDS Level 1)
1.5 MByte embedded program flash with ECC
32 KByte data flash for scalable EEPROM emulation
76 KByte on-chip SRAM
8 KByte instruction cache
16-pin header for JTAG interface (OCDS Level 1)
2 x 10pin (2x5) header for CAN High Speed Transceiver (CAN0 and CAN1)
4 x 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals
2 x SUB-D9 Plug connector for FlexRay (optional)
ETK connector (optional)
Infineon’s Next generation micro controller supply TLE 7368 G
2 x Infineon’s High Speed CAN-Transceiver TLE 6250 GV33
USB to UART bridge FT2232D (FTDI)
SPI EEPROM (Atmel)
8 general purpose LEDs
Reset switch
Infineon’s FlexRay Communication Controller SAK-CIC310 (optional)
2 x FlexRay Transceiver AS8221(AMS) or TJA1080 (NXP) (optional)

TriBoard TC1797
USB Cable
Extension Board
Technical documentation, User manuals (System Unit and Peripheral unit), Architecture manual
Evaluation Versions of Development Tools: e.g. Compiler, Debugger, Operating System from Tool Partners
Starter Kit Manual

TriBoard TC1767
USB Cable
Extension Board
Technical documentation, User manuals (System Unit and Peripheral unit), Architecture manual
Evaluation Versions of Development Tools: e.g. Compiler, Debugger, Operating System from Tool Partners
Starter Kit Manual

TriBoard TC1130
Technical documentation, User manuals (System Unit and Peripheral unit), Architecture manual
Evaluation Versions of Development Tools: e.g. Compiler, Debugger, Operating System from Tool Partners
Parallel cable, Extension Board
Starter Kit Manual

SAF-TC1130-L150E, SAF-TC1130-L100E, SAF-TC1115-L150E, SAF-TC1115-L100E, SAF-TC1100-L150E, SAF-TC1100-L100E 100/150 MHz
28 KBytes data memory (SPRAM)
32 KBytes code memory (SPRAM)
16 KBytes instruction cache (ICACHE)
4 KBytes data cache (DCACHE)
64 KBytes SRAM Data Memory Unit (DMU)
16 KBytes boot ROM
Burst FLASH up to 64 MBytes (default: 32 MBytes)
PC100 SDRAM 2 banks up to 64 MBytes per bank (default: 1 banks with 64 MBytes) or Micron SyncFlash 2 banks with 16 MBytes per bank
DB9 for RS232-0
BERG10 for RS232-1
2 x BERG10 for CAN-0/1 with Transceiver
BERG16 for OCDS1
SAMTEC QSH-030-01-F-D-A for OCDS2
RJ45 Connector with LED's for Ethernet
USB connector (type B) for USB connections
DB25 On Board Wiggler for OCDS1
4 x 80-pin connectors (male) with all I/O signals
4 x 80-pin connectors (female) with all I/O signals

TriBoard TC1161, TC1162, TC1163, TC1164, TC1165, TC1166
Technical documentation, User manuals (System Unit and Peripheral unit), Architecture manual
Evaluation Versions of Development Tools: e.g. Compiler, Debugger, Operating System from Tool Partners
Parallel cable, Extension Board
Starter Kit Manual

SAF-TC1161-128F66HL, SAF-TC1162-128F66HL, SAF-TC1163-128F80HL, SAF-TC1164-128F80HL, SAF-TC1165-192F80HL, SAF-TC1166-192F80HL 66/80 MHz
1.0/1.5 MByte embedded program flash with ECC
16/32 KByte data flash for scalable EEPROM emulation
32/40/56 KByte on-chip SRAM
8 KByte instruction cache
8/16 Kbyte code scratchpad memory
DB9 for RS232-0
BERG10 for RS232-1
2 x BERG10 for CAN-0/1 with Transceiver
BERG16 for OCDS1
SAMTEC QSH-030-01-F-D-A for OCDS2
DB25 On Board Wiggler for OCDS1
3 x 80-pin connectors (male) with all I/O signals
3 x 80-pin connectors (female) with all I/O signals